10. Playing Back and Editing Images
274
Recorded motion picture can be divided in two. It is recommended for when you want to
divide a part you need with a part you do not need.
Dividing a motion picture is permanent. Decide before you divide!
1 Select the menu. (P63)
2 Press 2/1 to select the motion picture to divide, and then press [MENU/SET].
Not available in these cases:
•
Avoid trying to divide motion picture near the very beginning or end of the motion picture.
• This function is not available in the following case:
– Motion pictures with a short recording time
[Video Divide]
> [Playback] > [Video Divide]
3 Press 3 at the location to divide.
•
You can finely adjust the location for division by pressing
2/1 while the motion picture is paused.
4 Press 4.
•
Confirmation screen is displayed. It is executed when
[Yes] is selected.
Exit the menu after it is executed.
• Motion picture may be lost if the card or battery is removed
while processing the dividing.
MENU
To Next Page
Loading...
Need help?
General
