11. Using the Wi-Fi/NFC Function
312
When sending images to AV device
You can send pictures and motion pictures to AV devices in your house (home AV
devices).
1 Select the menu. (P63)
2 Select [Via Network] or [Direct], and connect. (P324)
3 Select a device you want to connect.
4 Check the send settings, and select [Set].
•
To change the send setting, press [DISP.]. (P309)
5 Take pictures. (P308)
5 Select the picture. (P308)
A Wireless access point B Home AV device
Preparations
When sending a picture to AV devices, set your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
[Send Images While Recording] or [Send Images Stored in the Camera] >
[AV device]
When [Send Images While Recording] has been selected
When [Send Images Stored in the Camera] has been selected
MENU
To Next Page
Loading...
Need help?
General
