11. Using the Wi-Fi/NFC Function
296
After use, terminate the connection to the smartphone.
1 Select the camera’s menu items to terminate the
Wi-Fi connection.
•
Confirmation screen is displayed. It is ended when [Yes] is
selected.
• You can also terminate the connection by pressing [Wi-Fi] on the camera. (P287)
2 On the smartphone, close “Image App”.
1 Connect to a smartphone. (P290)
2 Operate the smartphone.
For both iOS devices (iPhone/iPod touch/iPad) and Android devices
Terminating the connection
> [Setup] > [Wi-Fi] > [Wi-Fi
Function]
(If you are using an iOS device)
On the screen of “Image App”, press the home button to close the app.
(If you are using an Android device)
On the screen of “Image App”, press the return button twice to close the app.
Taking images via a smartphone/tablet (remote recording)
1 Select [ ].
2 Record an image.
•
The recorded images are saved in the camera.
• Some settings are not available.
• When recording with 4K Pre-Burst with the smartphone,
terminate the connection only after switching to 4K Burst
recording by pressing [ ] on the camera.
Not available in these cases:
•
In the following case, remote recording does not work:
– Panorama Shot Mode
– When using [Time Lapse Shot]
– When [Snap Movie] is set to [ON]
A
To Next Page
Loading...
Need help?
General
