Paradox Spectra SP7000 User Manual

Magellan & Spectra SP Programming Guide • Description of Sections [700] to [704] Wireless Siren Labels | 37
Cancelling the Tamper Supervision for Wireless Sirens
To cancel tamper supervision, access section [695], and then press ENTER. The tamper supervision is disabled until the cover is replaced or after 30 minutes have elapsed.
Description of Sections [700] to [704]
The following section provides information on sections [700] to [704]. See table 25 for details. For keypad programming instructions, refer to on page 7.
Table 25: Description of sections [700] to [704]
Option Option Type Description OFF ON Option Option Type Description OFF ON
Section [700]
1 Partitioning Partitioning  Disabled

Enabled
Section [701]
1
Access/master code
options
Access code length*

6 digits  4 digits
2
General system options
Battery charging, 350 mA or 700 mA
(not applicable to SP4000 and SP65)
 350 mA

700 mA 2 Lock master code  Disabled

Enabled
3
Audible trouble warning (except AC
failure)
 Disabled

Enabled 3
Keypad options 1**
Confidential mode  Disabled

Enabled
4 Audible trouble warning on AC failure  Disabled

Enabled 4 To exit confidential mode  Enter code

Press a key
5 RF jamming supervision RF jamming supervision
 Disabled  Enabled 5 Confidential mode timer  2 mins.

5 secs.
6
General system options
Exit delay termination  Disabled

Enabled 6 REM2 version number REM2 version number

V2.00 
V2.01 or
higher
7 Tamper supervision on the bus module  Disabled

Enabled 7
Keypad options 1
Display entry delay on LCD keypad

Disabled  Enabled
8Future use - ---- 8 Display exit delay on LCD keypad

Disabled  Enabled
Section [702]
1
Panic options
Panic 1  Disabled

Enabled
Section [703]
1
Keypad options 2
One-touch regular arming (also REM3)

Disabled  Enabled
2Panic 2  Disabled

Enabled 2 One-touch stay arming (also REM3)

Disabled  Enabled
3Panic 3  Disabled

Enabled 3 One-touch sleep arming (also REM3)

Disabled  Enabled
4 Panic 1: report only or audible alarm  Report only

Audible 4 One-touch bypass programming

Disabled  Enabled
5 Panic 2: report only or audible alarm  Report only

Audible 5
Arming/disarming options
Restrict arming on battery failure  Disabled

Enabled
6 Panic 3: report only or audible alarm  Report only

Audible 6
Restrict arming on tamper failure (zone
+ bus module + wireless PGM)
 Disabled

Enabled
7Future use - ---- 7
Restrict arming on supervision trouble;
wireless zones & PGM + bus module
 Disabled

Enabled
8Future use - ---- 8Arm/disarm with VDMP3Arm/disarm with VDMP3

Disabled  Enabled
Section [704]
1
Arming/disarming options
Regular arming switches to force
arming

Disabled  Enabled
= Default
*All numbers from 000000 to 999999 are valid giving a total o f 1,000,000 different possible combinations.
**Automatic timed operation that will make indications inaccessible to users without a valid access code.
2
Stay arming switches to stay force
arming

Disabled  Enabled
3
Sleep arming switches to sleep force
arming

Disabled  Enabled
4
Bell squawk when arm/disarm with
remote
 Disabled

Enabled
5
Keypad options 3
Bell squawk when arm/disarm with a
keypad
 Disabled

Enabled
6 Beep on exit delay

Disabled  Enabled
7
No exit delay beeps and no bell
squawk, when stay/sleep arm

Disabled  Enabled
8 Arming/disarming options No exit delay when arm with remote  Disabled

Enabled

Paradox Spectra SP7000 Specifications

General

Brand	Paradox
Model	Spectra SP7000
Category	Security System
Language	English