PEUGEOT Geopolis 250 Repair Manual

SERVICE OPERATIONS
27
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
- Remove the air filter. (1)
 Removal of the spark plug
- Remove the storage compartment. See:
Procedure 1. page 18.
- Remove the access door.
- Disconnect the suppressor.
- Remove the spark plug.
Essential precautions: When re-installing,
srew in the spark plug (a few turns)
by hand. For torquing, use a spark
plug wrench equipped with a dial.
- Tighten the spark plug.
Tightening torque: 1.2 m.daN.
 Replacing the rollers and drive belt
- Remove the storage compartment. See:
Procedure 1. page 18.
Remove the 3 air filter box fixing bolts (1).
(including 1 screw, 1 nut and 1 pin in (A).
- Remove the transmission cover. (Refer to
the 250cc Engine workshop manual.
4 valves. Reference 758850.
1
A
1

PEUGEOT Geopolis 250 Specifications

General

Displacement	244.3 cc
Cooling System	Liquid cooled
Transmission	Automatic CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shock absorbers
Engine Type	Single cylinder, 4-stroke
Front Tire	120/70-15
Power	22.5 hp