PEUGEOT Geopolis 250 Repair Manual

MISCELLANEOUS OPERATIONS
43
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
 Steering system tightening method
- Grease the cup bearing races.
- Fit the caged ball bearing. (1 and 2).
- Fit the fork into the steering column.
- Install the adjustable cone and tighten it. (3)
Tightening torque: 4 m.daN.
- Loosen and then retighten the adjustable
cone.
Tightening torque: 2.2 m.daN.
- Install the rubber washer. (4)
- Finger tighten the adjustable cone
locknut (5) so that its notches are aligned
with those of the adjustable cone.
- Fit the lock washer (6) in the notches of the
locknut and adjustable cone.
- Install the steering head locknut and tighten
it. (7)
Tightening torque: 7.5 m.daN.
2
1
4
6
5
7
3

PEUGEOT Geopolis 250 Specifications

General

Displacement	244.3 cc
Cooling System	Liquid cooled
Transmission	Automatic CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shock absorbers
Engine Type	Single cylinder, 4-stroke
Front Tire	120/70-15
Power	22.5 hp