PEUGEOT Geopolis 250 Repair Manual

MISCELLANEOUS OPERATIONS
41
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
 Removal of the fork
 Replacing the bearings of the steering
system
- Remove the front top cover panel.
- Remove the handlebar front and rear
covers.
- Remove the 2 upper screws that secure the
rear shield panel.
- Remove the braking units on the
handlebars.(1)
- Remove the handlebars from the fork tube.
- Remove the front mudguard.
- Remove the front brake caliper from the fork
tube.
- Remove the front wheel.
- Using tool P/N 757860 remove the steering
locknut.
- Remove:
• The lock washer.
• the adjustable cone locknut.
• the rubber washer.
• the adjustable cone.
- Remove the fork.
- Remove the balls.
- Using a drift, remove the steering head
cups.
757860
1
757860

PEUGEOT Geopolis 250 Specifications

General

Displacement	244.3 cc
Cooling System	Liquid cooled
Transmission	Automatic CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shock absorbers
Engine Type	Single cylinder, 4-stroke
Front Tire	120/70-15
Power	22.5 hp