PEUGEOT Geopolis 250 Repair Manual

SERVICE SCHEDULE AND COMMISSIONING
6
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
SERVICE SCHEDULE AND COMMISSIONING
Heavy duty servicing is for vehicles used under "harsh" conditions: door-to-door deliveries, intensive
urban use (courier), short journeys with engine cold, dusty areas, ambient temperature over 30°C.
Service operations.
1000 kms
or
1 months
Every
5000 kms
or
12 months
Every
10000 kms
Every
15000 kms
Every
20000 kms
Heavy duty servicing. 500 kms
Every
2500 kms
Every
5000 kms
Every
7500 kms
Every
100000 k
ms
 Check
Throttle cable play. C C C C
Steering column play. C C C C
Operation of electrical equipment. C C C C
Condition of front and rear brake
hydraulic controls.
CCC C
Condition of petrol pipes. C C C C
Condition of oil pipes. C C C C
Tyre pressures. C C C C
Tyre condition, pressure and wear. C C C C
Condition of the front suspension. C C C C
Condition of the rear suspension. C C C C
Brake fluid level. C C C C
Battery electrolyte level *. C C C C
Coolant level. CCCCC
Engine oil level. C
Tightening the engine mounting and
linkrod.
CCCC
Tightness of nuts and bolts. C C C C
 Change
Spark plug. R
Inlet silencer/air filter. N N
Front brake pads #. C C C C
Rear brake pads #. C C C C
Drive pulley bearings and guides #. C C
Transmission belt. R
Belt anti-flapping roller #. C C
Engine oil (+ clean strainer). RCRCR
Engine oil filter. R R R
Relay box oil. R C R
Brake fluid and coolant. Once every 2 years

PEUGEOT Geopolis 250 Specifications

General

Displacement	244.3 cc
Cooling System	Liquid cooled
Transmission	Automatic CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shock absorbers
Engine Type	Single cylinder, 4-stroke
Front Tire	120/70-15
Power	22.5 hp