PEUGEOT Geopolis 250 Repair Manual

MISCELLANEOUS OPERATIONS
33
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
 Checking fuel pressure
- Remove the tank cover panel. See:
Procedure 3. page 19.
- Carry out the procedure for lowering the
pressure in the fuel system. See:
Procedure 7. page 33.
- Disconnect the fuel supply hose.
- Insert the pressure gauge P/N 757877
between the gauge well and the supply
hose.
- Always use hose clamps that are in good
condition.
- Turn the ignition on 3 times to bleed the fuel
system.
- With the engine stopped, check the fuel
pressure which must be 2.5 bars when
switching on the fuel pump.
Before disconnecting the pressure gauges, lower the fuel pressure in the fuel system.
Always reinstall the hoses with new hose clamps.
0
6
8
10
2
4
bar

PEUGEOT Geopolis 250 Specifications

General

Displacement	244.3 cc
Cooling System	Liquid cooled
Transmission	Automatic CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shock absorbers
Engine Type	Single cylinder, 4-stroke
Front Tire	120/70-15
Power	22.5 hp