MISCELLANEOUS OPERATIONS
32
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
MISCELLANEOUS OPERATIONS
Procedure for reducing the fuel circuit
pressure
Procedure 7.
- Remove the storage compartment. See:
Procedure 1. page 18.
- Disconnect the fuel injector.
- Remove the fuel injector.
- Remove the fuel injector without
disconnecting the supply hose.
- Connect the fuel injector power supply
harness tool P/N 756017 to the fuel injector
and the battery.
- Place the injector above a pan.
- Actuate the contact switch of the tool 2 times
for 5 seconds while respecting a released
time of 5 seconds between each action, in
order to drop the pressure inside the supply
hose of the fuel manifold.
The pressurised jet of fuel may be dangerous for the skin, do not expose the hands to the jet of
fuel when opening the injector.
UPPER LEVEL
LOWER LEVEL
756017
To Next Page
Loading...
Need help?
General
