01_21
CORRECT PROGRAMMING CHECK PHASE
Insert the «MASTER» key «A» disabling the transponder «C» (i.e., by tilting the key
cap by 90°), and turn the key to «ON». Perform the engine start-up operation. Ensure
that the engine does not start. Insert the programmed key «B» and repeat the start-
up operation. Check that engine starts.
WARNING
SHOULD YOU START THE ENGINE WITH THE MASTER KEY (WITH TRANS-
PONDER OFF) OR IN THE EVENT OF WRONG OPERATION DURING PROGRAM-
MING, REPEAT THE PROCEDURE FROM THE BEGINNING.
01_22
Accessing the fuel tank (01_22)
To open the fuel tank cover, set the key to «OFF» or « ON», then press and turn it
clockwise.
23
To Next Page
Loading...
Need help?
General