PIAGGIO MP3 400 i.e. User Manual

With interface wiring connected to the control unit,
secure the vehicle on its centre stand and switch
to "ON". Select the reading scale on 20 V. Insert
the multimeter probes on pins 17 and 25. Check
that the voltage in the activated locking condition
is 4V and 1V in the locking to rest condition.
With the interface wiring disconnected from the
control unit, check the continuity between pin 17
and the yellow cable of the potentiometer connec-
tor, between pin 25 and the green-blue cable,
between pin 11 and the orange-blue cable. Also
check that these lines are insulated from each oth-
er and earth.
RIDER PRESENCE SENSOR
Suspensions MP3 400 i.e.
SUSP - 34

PIAGGIO MP3 400 i.e. Specifications

General

Brand	PIAGGIO
Model	MP3 400 i.e.
Category	Scooter
Language	English