Signals referenced are for a DTE device.
4.14. Peripherals and Accessories
The following items are sold separately and enhance your HANDY TERMINAL’s capabilities.
This charging and communication cradle supports USB and RS-232 communication, enabling your
terminal to interface with the majority of enterprise systems. When a terminal is seated in a
powered base, its main battery pack charges in four hours for the standard capacity 2200mAh pack
and in six hours for the high capacity 3300mAh pack.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see Single Slot Docking cradle/Single Slot Ethernet cradle Device on
paragraph 12.
The Single Slot Ethernet cradle is used to charge the main battery, to power the battery charging
system in the terminal, and can be used to communicate data from the terminal to a PC/laptop via
the Ethernet port.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see Single Slot Docking cradle/Single Slot Ethernet cradle Device on
paragraph 12.
4.15. USB ActiveSync Cable
The USB ActiveSync Cable is used when communicating between the terminal and a host computer
to transfer data via the USB interface.
4.16. Li-ion Battery Packs
The Li-ion battery pack provides the main power supply for the terminal.
4.17. Battery Power
The intelligent battery technology inside the terminal features two types of battery power:
• The main battery pack
• The backup battery located inside the terminal
Both batteries work together to prevent data loss when the terminal is used over long periods of
time.
Both batteries must be charged to full capacity before using the HANDY TERMINAL for
the first time!
Charge the main battery pack with the Handy Terminal charging cable for a minimum of 4 or 6
hours depending on your battery before initial use.
27
To Next Page
Loading...
Need help?
General
