Point Mobile PM260 User Manual

10.9.
Setting Up the Handy Terminal
The Handy Terminal defaults to USB communication out of the box. To verify and/or change the
default setting, tap Start -> Settings -> Control Panel -> PC Connection.
10.10.
Communicating with the Handy Terminal
After setting up both the workstation and the terminal, ActiveSync connection should be automatic.
1. Connect the Handy Terminal to a communication peripheral, such as the Handy Terminal Docking
cradle.
2. The Handy Terminal automatically opens ActiveSync or Windows Mobile Device Center to
establish a connection.
10.11.
Synchronizing with the Host Workstation
After setup, synchronization begins automatically whenever the terminal’s mechanical connector
connects to a Handy Terminal peripheral that is connected to a host workstation with ActiveSync
installed.
10.12.
Exploring the Terminal from the Workstation
When the terminal and desktop computer are connected, open the main ActiveSync window (on the
desktop), and click Explore.
Displays the current connection setting
Must be checked to connect to a workstation
54

Point Mobile PM260 Specifications

General

Brand	Point Mobile
Model	PM260
Category	Handhelds
Language	English