3
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
3.25
26. Install the water pump drive shaft holding tool (Item
#1) in kit PU-50869. Hold the tool in position and flip
the assembly up-side-down so the special tool PU-
50869 is supporting the assembly.
27. Lubricate the new water pump oil seal with clean
engine oil.
28. Use the water pump oil seal installation tool in kit
29. PU-50869 to fully install the new water pump oil seal
(I).
CAUTION
Be sure the oil seal is fully seated in cover or severe
engine damage may result
30. Use the water pump mechanical seal installation tool
in kit PU-50869 to fully install the new water pump
mechanical seal (J) until it is fully seated in the cover.
31. Install a new stator cover gasket onto the engine.
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
