3.48
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
24.Disconnect the fuel line
g
at the fuel rail.
25.Disconnect vent line
h
from the valve cover.
26.Loosen and remove clamps
j
retaining intake
manifold to engine. Remove lower manifold mounting
bolt
k
(to trans mount bracket).
27.Remove intake manifold and throttle body as
assembly.
28.Disconnect the starter wiring.
29.Remove PVT hoses and outer cover.
30.Remove secondary clutch, belt, and primary clutch.
31.Remove six fasteners
l
and remove the inner PVT
cover baffle.
32.Support the bottom side of the engine with wood
blocks or from the top side with an engine lift.
33.Remove the three allen screws
1(
and washers
2)
retaining inner cover to engine.
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
