Polaris RZR XP 1000 2015 Service Manual

2.8
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
GREASE LUBRICATION POINTS
There are grease fittings at each front A-arm pivot point, each rear torsion bar bushing and on the front propshaft
yokes. Apply grease until all traces of water have been purged out at each of these areas.
ITEM METHOD RECOMMENDED LUBE
FREQUENCY
Front A-arm
Pivot Bushings
Grease 3 fittings on each side
of the vehicle
q
Polaris All Season Grease
Grease fittings every 500
miles (800 km); Grease
before long periods of
storage, and after
thoroughly washing or
submerging the vehicle
Front Stabilizer
Bar Bushings
(FOX and INT’L)
Grease the fitting on each side
of the vehicle
w
Polaris All Season Grease
Rear Stabilizer Bar
Bushings
Grease 2 fittings through the
skid plate access holes on
each side of the vehicle
e
Polaris All Season Grease
Propshaft Yokes
Grease middle and rear
fittings
r
Polaris Premium U-Joint Grease
*There is no grease point on the upper control arm rear mount.
MAINTENANCE

Polaris RZR XP 1000 2015 Specifications

General

Brand	Polaris
Model	RZR XP 1000 2015
Category	Offroad Vehicle
Language	English