4.24
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
Indicators that the quick connect is damaged, and
assembly replacement is needed:
1. The retaining clip can be closed without the insertion
of a hard line end. The retaining clip is designed to
lock only when a hard line end has been fully
inserted.
2. Retaining tabs are deformed and no longer lock into
the body of the quick connect.
3. Broken retaining tabs, or any sign of cracks in the
retaining clip. The retaining clip is responsible for
holding the quick connect on the line when under fuel
pressure.
4. Quick connect has been twisted from its original
inserted position, or the connector has been
damaged.
FUEL LINE REMOVAL / INSTALLATION
1. Place a shop towel around the fuel line to catch any
dripping fuel.
2. If removing either end of supply line
w
, release the
locking mechanism on the fitting and pull the supply
line off. Refer to Fuel Line Quick Connect Removal,
page 4.22.
3. Pull on the fuel line for removal.
4. To install the line, verify the connections are clean
and free of debris.
FUEL SYSTEM
To Next Page
Loading...
Need help?
General
