Polaris RZR XP4 1000 2017 User Manual

11
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
11.37
HAZARD SWITCH (INT'L / TRACTOR)
Testing
1. Disconnect the harness from the hazard switch.
2. Test outputs in both the ON and OFF positions. If any
of the tests fail, replace the switch.
• Move switch to ON. There should be continuity
between switch pins 2 and 3.
• Move the switch to OFF. There should be no continuity
between any switch pins.
TURN/LIGHTS/HORN SWITCH (INT'L/
TRACTOR)
Testing
1. Disconnect the Turn/Lights/Horn switch by
depressing the connector locks and pulling on the
connector. Do NOT pull on the wiring.
2. Test between the sets of outputs. If any of the tests
fail, replace the switch assembly.
• Turn on the High Beam. There should be continuity
between switch pins 2 and 5.
• Turn on the Low Beam. There should be continuity
between switch pins 2 and 6.
• Turn on the Left Turn Signal. There should be
continuity between switch pins 1 and 8.
• Turn on the Right Turn Signal. There should be
continuity between switch pins 1 and 7.
• Depress the Horn. There should be continuity between
switch pins 3 and 4.
ELECTRICAL

Polaris RZR XP4 1000 2017 Specifications

General

Brand	Polaris
Model	RZR XP4 1000 2017
Category	Automobile
Language	English