Poly TC10 Admin Guide

Using the Poly TC10 in Poly Video Mode4
Pair the Poly TC10 with a video system and set the Provider to Poly in the system web interface to
control and manage your Poly video system with the Poly TC10.
NOTE: Poly Video Mode isn't available if the Poly TC10 is in standalone mode.
Cameras
Camera controls are available in and out of calls.
You can control cameras, depending upon the camera type, in the following ways:
● Adjust an in-room camera
● Turn camera tracking on or off
Selecting the Primary Camera
In Poly Video Mode, if you have more than one camera attached to the system, you can select the
primary camera in or out of a call.
Camera Priority
When you connect or disconnect a camera, camera priority determines the primary or active camera.
The system observes the following camera type priority:
1. Embedded camera
2. HDCI camera
3. USB camera
4. HDMI source set to display as people
Select the Primary Camera Using the Poly TC10
When you attach multiple cameras to the system, you can select the primary camera from the TC10
Camera Controls screen.
1. Select Camera .
16
Chapter 4Using the Poly TC10 in Poly Video Mode

Poly TC10 Specifications

General

Brand	Poly
Model	TC10
Category	Conference System
Language	English