Download and Install Polycom
®
People+Content
™
Technology
You need to download and install the Polycom
®
People+Content
™
technology on a computer before you
can use it to show content.
Procedure
1. On a computer, go to the Polycom People+Content IP page.
2. Download the People+Content IP software for Mac or PC.
3. Open the zip file and click on the application installation.
4. Follow the instructions in the installation wizard.
Share Content using People+Content IP
After you download and install People+Content IP, you are ready to share content.
Procedure
1. On your computer, do one of the following:
• On a Windows computer, navigate to My Computer
and click the People+Content IP
folder.
• On a Mac computer, navigate to Finder then search for and run the People+Content IP
application.
2. Enter the IP address or host name of the Polycom Trio system and the meeting password, if one is
set.
3. Click Connect.
4. Open the content you want to show and click .
Stop Sharing Content with People+Content IP
When you are done showing content, make sure you stop People+Content IP.
Procedure
1. Click in the People+Content IP application.
Share Content with People+Content IP over USB
You can connect your Windows or Mac computer over USB to the system and show content using the
People+Content IP application. Video and data sent using the People+Content IP application is sent over
the USB cable and no network connection is required. This is useful for environments where guest IP
access is not allowed.
Procedure
1. Connect a USB cable from the USB port on the Polycom Trio to the USB port on your computer.
A folder with the People+Content IP application opens automatically.
2. If the application folder does not open automatically, on your computer, do one of the following:
Sharing Content on Polycom Trio
Smart Choice Communications | (800) 217-3096 | www.smartchoiceus.com | techsupport@smartchoiceus.com
© 2019 Smart Choice Communications, LLC
To Next Page
Loading...
Need help?
General
