Polycom Visual Concert VSX User Manual

Customizing the VSX System
4 - 13
3. Select if you need to adjust the VGA Input settings for systems that
have built-in VGA capture capability or that use a Visual Concert VSX for
VGA capture.
a Select Horizontal Position, Vertical Position, or Phase.
b Press the navigation buttons on the remote control to adjust the
setting.
c Press the Back button on the remote control to accept the setting.
4. Go to System > Admin Settings > Monitors > Monitors.
5. Select and select where to display Content.
6. Go to System > Admin Settings > Network > Call Preference.
7. Configure this setting:
8. VSX 7000e and VSX 8000—Go to System > Admin Settings > Audio >
Audio Settings.
9. Select two times and configure this setting:
Send Content
When PC
Connects
Specifies whether to send content automatically when the PC
is connected to the Visual Concert VSX or ImageShare II.
If this option is not selected, the presenter must press the
Play button on the Visual Concert VSX or ImageShare II to
send content to the far sites.
Setting Description
Settings Description
Enable H.239 Enables H.239 People+Content. Select this option if you
know that H.239 is supported by the far sites you will call.
Note: If callers experience issues when sharing content,
deselect Enable H.239.
Settings Description
Line Input Set Line Input to Visual Concert to share audio content.

Polycom Visual Concert VSX Specifications

General

Brand	Polycom
Model	Visual Concert VSX
Category	Conference System
Language	English