Matrix 424/832/832+ LCD Programming Manual
Page 16 RINS916-6
5.7 Zone Attributes – Arm Mode A (Function 271)
5.8 Zone Attributes – Arm Mode B (Function 272)
5.9 Zone Attributes – Arm Mode C (Function 273)
5.10 Zone Attributes – Arm Mode D (Function 274)
Programming for Arm Mode A is shown.
Press .
ENTER ZONE No.
__
Enter the zone number to configure as a 2-digit
number (01 – 32). *If zone doubling is selected
it is possible to program up to 64 zones
Example shows Zone
01.
This display is quickly
followed by the next.
ENTER ZONE No.
01
The current zone attributes are displayed.
Select any attribute by using the and
keys, or use the – keys to select that
option directly.
Press to toggle the option
ON
or
OFF
.
Press to accept the options.
ARM MODE A
OPTION 1 OFF
№ OPTION OFF OPTION ON
1 Chime Disabled Chime Enabled
2 Test Disabled Test Enabled
3 Mask Disabled Mask Enabled
4 Double Knock Disabled Double Knock Enabled
5 Normally Closed Normally Open
6
7
8
Reserved for Future Use. Do Not Alter.
Shaded = Default
To Next Page
Loading...
Need help?
General
