Pyronix Matrix 832 Programming Manual

Matrix 424/832/832+ LCD Programming Manual
RINS916-6 Page 35
12. OUTPUTS
12.1 Zone to Follow in Partition (Function 551)
Press .
ENTER PARTITION
_
Enter 1 digit for the partition (1 – 4).
Example shows Partition
1
This display is quickly
followed by the next
ENTER PARTITION
_1
The current zone allocated is displayed.
Example shows none
(00)
ENTER ZONE No.
00
Enter 2 digits for the new zone number (00 –
32,
00 = none).
Example shows zone 12
ENTER ZONE No.
12
Press  to accept the changes.
NOTE: Default is 00 (none).
12.2 PGM Type (Function 555)
Press .
ENTER PGM No.
__
Enter 2 digits for the PGM (01 – 12).
Example shows PGM 1
This display is quickly
followed by the next
ENTER PGM No.
01
The current PGM type is displayed.
Example shows External
Bell (type 14)
ENTER ZONE No.
00
Enter 2 digits for the new PGM type (00 – 30).
Press  to accept the change.
Example shows Follow
Zone (type 05)
ENTER PGM TYPE
14
The current PGM partition allocation is displayed.
Example shows all
partitions
ENTER PARTITIONS
_ 1234
Enter up to 4 digits for the partition allocation.
0 = All Partitions
1-4 = Partitions 1-4
Example shows Partition
1 only
ENTER PARTITIONS
1
Press  to accept the changes.
NOTE: If 4 digits are entered they ar
e
automatically accepted.
Defaults:
PGM TYPE PARTITION PGM TYPE PARTITION
1 External Bell 1 7 Not Used –
2 Follow Strobe 1 8 Not Used –
3 Follow Arm/Disarm 1 9 Not Used –
4 Follow PA Alarm 1 10 Not Used –
5 Not Used – 11 Not Used –
6 Not Used – 12 Not Used –

Pyronix Matrix 832 Specifications

General

Brand	Pyronix
Model	Matrix 832
Category	Control Panel
Language	English