Matrix 424/832/832+ LCD Programming Manual
RINS916-6 Page 17
5.11 Zone Partition (Function 280)
Press .
ENTER ZONE No.
__
Enter the zone number to configure as a 2-digit
number (01 – 32). *If zone doubling is selected
it is possible to program up to 64 zones
Example shows Zone
01.
This display is quickly
followed by the next.
ENTER ZONE No.
01
The current partition is displayed.
Enter a partition – .
Press to assign the zone to the partition.
ENTER PARTITION
1
NOTE: By default all zones are assigned to Partition 1.
5.12 Copy Arm A to B,C & D (Function 290)
Press .
COPY A TO B,C&D
SYSTEM BUSY
When complete you will be returned to Engineer
Mode.
To Next Page
Loading...
Need help?
General
