Pyronix Matrix 832 Installation Manual

Matrix 424, 832, 832+ Installation Manual
Page 32 RINS918-6
2.13 Programmable Outputs Wiring
2.13.1 External Sounder Connection to Matrix 424
2.13.2 External Sounder Connection to Matrix 832
MATRIX 832 PCB
BELLE
DECIBELL
T
he BELLE or DECIBELL may be connected usin
g
different programmable outputs.
In this instance PGM1 is programmed as “External
Bell” and PGM2 is programmed as “Follow Strobe”.
PGM1 = BA = BELL OUTPUT
PGM2 = STB = STROBE TRIGGER
MATRIX 424 PCB
BELLE
DECIBELL
T
he BELLE or DECIBELL may be connected usin
g
different programmable outputs.
The Bell Tamper must be connected to a spare
zone programmed as Tamper – in this case Z4.
In this instance PGM1 is programmed as “External
Bell” and PGM2 is programmed as “Follow Strobe”.
PGM1 = BA = BELL OUTPUT
PGM2 = STB = STROBE TRIGGER

Pyronix Matrix 832 Specifications

General

Brand	Pyronix
Model	Matrix 832
Category	Control Panel
Language	English