Raymarine RL70C User Manual

Chapter 5: Standard Chart Operations
87
Placing a Waypoint
The Place and Goto a Waypoint Scenario in Chapter 2 provides a simple
example of how to place a waypoint.
➤ To access the place waypoint soft keys, press MARKS:
D4169-1
PLACE WPT
AT CURSOR
PLACE WPT
AT VESSEL
WAYPOINT
LIST
➤ To place a waypoint at the cursor position or at the vessel position:
1. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL soft
key. The waypoint is added to the waypoint list and tagged using the next
available number.
The waypoint soft keys are displayed until you move the cursor away from
the waypoint or press CLEAR.
D4163-1
GOTO
WAYPOINT
EDIT
WAYPOINT
ERASE
WAYPOINT
MOVE
WAYPOINT
You can use the EDIT WAYPOINT soft key to name the the waypoint as
described in Editing Waypoints below.
3. Press CLEAR or ENTER to remove the place waypoint soft keys.
➤ To place a waypoint using the Waypoint List:
1. Press MARKS, followed by the WAYPOINT LIST soft key. The Waypoint List
and associated soft keys are displayed.
GOTO
WAYPOINT
EDIT
WAYPOINT
MAKE NEW
WAYPOINT
WAYPOINT
TRANSFER
D4262-1
WAYPOINT LIST
SYMBOL NAME
WAYPOINT 001
WAYPOINT 002
WAYPOINT 003
WAYPOINT 004
WAYPOINT 005
50°21^966N
001°20^368W
POSITION
BRG _186°
BRG _21.0nm
TEMP
---°
C
DEPTH
---
m
DATE
--/--/--
TIME
--:--:--
Placing a
Waypoint
WAYPOINT
LIST
EDIT
WAYPOINT
PLACE WPT
AT CURSOR
PLACE WPT
AT VESSEL

Raymarine RL70C Specifications

General

Brand	Raymarine
Model	RL70C
Category	Marine Equipment
Language	English