Raymarine RL70C User Manual

Chapter 5: Standard Chart Operations
109
➤ To set up a track:
1. Press the TRACK INTERVAL soft key.
Press the appropriate soft key to set either a time interval or a distance
interval; press the UP arrow to increase the interval, the DOWN arrow to
decrease the interval.
Press ENTER to return to the track soft keys.
TIME
1S
D4258-1
DISTANCE
0.1nm
2. Press the TRACK OFF ON soft key to toggle tracks on.
Your vessels trail will be displayed on-screen, with a line joining the points
at the selected interval.
Clearing the Current Track
You can clear the current track from the screen. When you select CLEAR TRACK,
if the current track has not been saved, you have the option of saving it.
➤ To clear the current track:
1. Press the CLEAR TRACK soft key.
2. If the track has not been saved the SAVE TRACK soft keys are displayed.
To clear the track without saving it in the Track List, press NO.
To save the track in the list, press YES. The Name track soft keys are
displayed and you should continue as described in the following section,
Saving and Naming a Track.
Press CLEAR to abort the Clear Track operation.
The current track is cleared from the screen and the default soft keys are
displayed.
Managing Tracks
Although it is easy to set up a track, and this track is retained even if you switch
off your display, you can store a number of different tracks so that you can
review them at a later date. This section explains how to perform the following
tasks:
• Save and name a track.
• Name, Erase and Show an existing track.
Saving and Naming a Track
You can save up to 10 named tracks in the Track List. These tracks can be re-
displayed at a later date.
TRACK
INTERVAL
TRACK
OFF ON
CLEAR
TRACK
SAVE
TRACK
Managing
Tracks

Raymarine RL70C Specifications

General

Brand	Raymarine
Model	RL70C
Category	Marine Equipment
Language	English