RCA CC174 User Manual

Using the Adapter/Charger to Power Your Camcorder
To AC 10024OV,
POWER Indicator
BATTFRY RELEASE Button
The adapter/charger’s power connector
attaches to the camcorder and lets you
power your camcorder directly from
standard household power. The
adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually
anywhere in the world to power the
camcorder or recharge the battery. You
may need a plug adapter in some
countries. Consult your RCA dealer. If
an adapter is required, be sure to purchase
it before traveling. The adapter can be
hard to find in foreign countries.
To Attach the Adapter/Charger
1. Connect the power connector’s small
plug into the DC OUT jack on the
adapter/charger.
2. Hold the power connector flush against
the back of the camcorder, and slide it
to the right in the direction of the
arrow as shown.
3. Plug the adapter/charger’s plug into
the nearest AC outlet (lOO-24OV,
50160Hz).
4. If the adapter/charger is properly
connected, its POWER indicator
will
light.
Using an optional plug adapter
An optional plug adapter may be
required
in some countries.
o*y@’ @I
Plug Adapter
AC IOO-240V
1. Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into the
AC outlet.
To Remove the Adapter/Charger
1. Unplug the adapter/charger from
the
wall outlet.
2. Press and hold the BATTERY
RELEASE button on the camcorder
while sliding the power connector
to
the left and off the camcorder.
16

RCA CC174 Specifications

General

Brand	RCA
Model	CC174
Category	Camcorder
Language	English