1. If the strap keeper is over a double
section of the strap, slide the strap
keeper off the end of the strap. Replace
the keeper on the strap between the
buckle and the end of the strap as
shown above.
2. Loop the end of the strap over the top
of the shoulder strap attachment ring.
Then thread the end of the strap back
through the keeper and buckle. Make
sure the strap is not twisted.
3. Attach the other end of the strap to the
other shoulder strap attachment ring.
4. Adjust the shoulder strap to the
length. Then slide both keepers up
snugly against the shoulder strap
attachment rings to prevent the
To Next Page
Loading...
Need help?
General
