RCA Professional series User Manual

26
Controls and Displays
Remote Control
INPUT SELECTOR
CDTV/SATDVD/LD
RECEIVER
POWER
TEST
TONE
LEVEL EFFECT
TUNER EDIT
SET
STANDARD STEREO
ADVANCED
SURROUND
INPUT
AT T
FL
DIMMER
MUTE
MASTER
VOLUME
CD-R
TAPE/MD
VCR
DVR
ENTER
SETUP
A/V SYSTEM REMOTE
STAV-4180
TUNING
BAND CLASS MPX
DISPLAY
CH SELECT
P-SET
MIDNIGHT
LOUDNESS
TUNER
OSR
2
6
1
3
4
5
10
11
9
12
8
7
1 RECEIVER (POWER)
Switches the receiver between on and
standby.
2 MIDNIGHT LOUDNESS (page 31)
Use to switch to Midnight or Loudness
listening.
3 LISTENING MODE buttons
STANDARD (pages 28, 30, 37)
Press for Standard decoding and to
switch between the various Pro Logic II
options.
ADVANCED SURROUND (pages 28, 30)
Use to switch between the various
surround modes.
STEREO (/DIRECT) (pages 28, 29)
Switches stereo and direct playback.
Direct playback bypasses the tone
controls and channel levels for the most
accurate reproduction of a source.
4 INPUT ATT
Use to attenuate (lower) the level of an
analog input signal to prevent distortion.
5 FL DIMMER
Use this button to make the fluorescent
display (FL) dimmer or brighter.
6 TUNER EDIT (pages 39–40)
Press to memorize and name a station for
recall using the
P–SET @/# buttons.
7 INPUT SELECTOR buttons
Use to select the input source.
8 Volume buttons
Use
MASTER VOLUME +/– to set the overall
listening volume. Use MUTE to mute the
sound or restore the sound if it has been
muted.
9 Tuner controls
The
TUNING @/# buttons can be used to
find radio frequencies. The P–SET @/#
buttons can be used to select preset radio
stations (pages 39–40).
BAND (page 38)
Use to switch between the AM and FM
bands when the tuner is selected.
CLASS (pages 39–40)
Use to switch between the three banks
(classes) of station presets.
31_5021.RCA.22.27 03.3.17, 8:25 PM26

RCA Professional series Specifications

General

Brand	RCA
Model	Professional series
Category	Receiver
Language	English