RCA Professional series User Manual

33
Setting Up the Receiver
Choosing Your Receiver
Setup
Even though you may already have your
system up and running after using the “5
Minute Guide” on pages 9 to 13, you should
also be sure to complete the following set up
operations to ensure the best possible
surround sound. This is particularly
important when using Dolby surround. You
only need to make these settings once
(unless you change the placement of your
current speaker system or add new speak-
ers). Refer to the following pages for details
on each of the settings.
RECEIVER
POWER
SET
ENTER
1 Press RECEIVER (POWER) to turn
the power on.
The STAND BY indicator goes out.
2 Press SET.
3 Use  or  to choose the option
you want to adjust.
It will be easiest to adjust each of the
settings in turn, following the order
below (and on the following pages). The
current setting is shown for each option
as you cycle through the display.
Speaker setting (page 34)
Specifies the number and type of
speakers you have connected.
Subwoofer setting (page 34)
Specifies how the subwoofer is used.
Crossover frequency setting (page 34)
Determines which frequencies will be
sent to the subwoofer (or large speakers).
LFE attenuator setting (page 35)
Specifies the peak level for the LFE
channel.
Front speaker distance setting (page
35)
Specifies the distance from your listening
position to your front speakers.
Center speaker distance setting (page
35)
Specifies the distance from your listening
position to your center speaker.
Surround speaker distance setting
(page 35)
Specifies the distance from your listening
position to your surround speakers.
Dynamic range control setting (page
36)
Compresses the dynamic range of the
sound track.
Dual mono setting (page 36)
Isolates one channel when listening to
discs with dual mono encoding.
Coaxial digital input setting (page 36)
Specifies the component to be assigned
to the coaxial digital input.
Optical digital input setting (page 36)
Specifies the component to be assigned
to the optical digital input.
4 Use  or  to adjust the setting.
The setting is entered automatically.
5 Repeat steps 3 and 4 to set other
surround modes.
31_5021.RCA.33.37 03.3.17, 8:25 PM33

RCA Professional series Specifications

General

Brand	RCA
Model	Professional series
Category	Receiver
Language	English