IF.UG.IM_R1
1. If the KrosFlo System is used in a manner not specified by the manufacturer, the protection
provided by the unit may be impaired.
2. Obtain work authorization and check the status of the System. Using the System without
physical supervision (for example, if System is remotely controlled), when it is damaged or
has malfunctioned, can led to personal injury.
3. If untrained or unauthorized personnel operate the System incorrectly, System damage can
result. To prevent System damage due to improper operations, ensure personnel are trained
appropriately for their levels of access and use secured access passwords to prevent
unauthorized operation.
4. Running the System manually without adequate training can lead to equipment damage. To
prevent equipment damage, ensure personnel do not run the System manually unless they
are adequately trained and have the correct authorization level.
5. Pressing the emergency stop button does not disconnect power from the electrical control
panel and pumps.
6. The System flow-path may remain filled and slightly pressurized during power lost or
emergency-stop. Opening a line, connector, or component could release biologically or
chemically hazardous materials, resulting in injury or death.
7. To prevent exposure to hazardous materials, follow the procedures and appropriate
instructions for the correct assembly, setup, verification, and operation of the System.
Follow the System owner’s PPE requirements.
8. Moving the System or vibration during operation can loosen connections, resulting in a spill
of a potentially hazardous process fluid leading to injury. To prevent spills, exposure, and
injury, ensure all process connections are securely connected and all legs are leveled and
locked, then replace the appropriate components as soon as possible, for example the flow-
path.
9. Maintain a safe distance from the System during System startup or other activities that may
involve splashing.
To Next Page
Loading...
Need help?
General
