When a Job Is Not Performed
If you are not able to carry out your job, it may be that the machine is being used by another function.
Wait until
the current job is completed before trying again. In certain cases, you can carry out another job
using a different function while the current job is being performed. Performing multiple functions
simultaneously like this is called "Multi-accessing".
Combination Chart
Function Compatibility
The chart shows Function Compatibility when print priority is set to [Interleave]. For details about Print
Priority, see "General Features", Network and System Settings Reference
.
: Simultaneous operations are possible.
: Operation is enabled when the relevant function key is pressed and remote switching (of the
scanner/external extension) is done.
: Operation is enabled when the [Interrupt] key is pressed to interrupt the preceding operation.
: Operation is performed automatically once the preceding operation ends.
: The operation must be started once the preceding operation ends. (Simultaneous operations are
not possible.)
1. When the Machine Does Not Operate As Wanted
20
To Next Page
Loading...
Need help?
General
