Message Causes Solutions
"You do not have the
privileges to use this function."
The logged in user name does
not have permission for the
selected function.
Contact the administrator about the
permission for the required function.
Other Messages
This section describes likely causes of and possible solutions for the error messages that are printed on the
error logs or reports.
Message Causes Solutions
"84: Error" There is no work area
available for image
processing.
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• Decrease the
number of files sent to
the machine.
"86: Error" Parameters of the control
code are invalid.
Check the print settings.
"91: Error" Printing was canceled by the
auto job cancel function due
to a command error.
Check that the data is valid.
"92: Error" Printing was canceled
because [Job Reset] or the
[Clear/Stop] key was
selected on the machine's
control panel.
Perform the print operation again if
necessary.
"Address Book is currently in
use by another function.
Authentication has failed."
The machine currently cannot
perform authentication
because the Address Book is
being used by another
function.
Wait a while, and then retry the
operation.
3. Troubleshooting When Using the Printer Function
44
To Next Page
Loading...
Need help?
General
