Problem Causes Solutions
Memory frequently becomes
full.
The Document Server
memory is full.
Delete unnecessary files. On the file
selection display, select unnecessary
files, and then press [Delete File]. If this
does not increase available memory, do
the following.
• Switch to the scanner screen, and
then delete unnecessary files
stored under the scanner function.
• Switch to the printer screen, and
then delete unnecessary files
stored under Sample Print, Locked
Print, Hold Print, or Stored Print.
"Cannot display preview of
this page."
appears, and you
cannot check the thumbnail
image.
The image data may have
been corrupted.
Press [Exit] to display the preview screen
without a thumbnail.
If the selected document contains
several pages, press [Switch] on the
"Display Page" area to change the
page, and then a preview of the next
page will appear.
When Memory Is Full
This section describes likely causes of and possible solutions for problems related to full memory.
Message Causes Solutions
"Memory is full. nn originals
have been scanned. Press
[Print] to copy scanned
originals. Do not remove
remaining originals."
"n" in
the message represents
a changeable number.
The scanned originals
exceed the number of pages
that can
be stored in memory.
Press [Print] to copy scanned originals
and cancel the scanning data. Press
[Stop] to cancel the scanning data and
not copy.
"Press [Continue] to scan and
copy remaining originals."
The machine checked if the
remaining originals
should be
copied, after the scanned
originals were printed.
Remove all copies, and then press
[Continue] to continue copying. Press
[Stop] to stop copying.
When You Cannot Make Copies As Wanted
35
To Next Page
Loading...
Need help?
General
