7. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Moving the loaded paper excessively can cause damage to paper edges on the openings of the
tray's lifting plate, resulting in sheets being folded or becoming jammed.
8. Lift the front side of the tray, and then slide it into the machine carefully until it stops.
To avoid paper jams, make sure the tray is securely inserted.
• When loading paper larger than A4 or 8
1
/
2
× 11 into Tray 1, extend the tray. For details, see
page "Extending Tray 1", Paper Specifications and Adding Paper.
• Letterhead paper must be loaded in a specific orientation. For details, see page 128 "Loading
Orientation-fixed Paper or Two-sided Paper".
• You can load envelopes into Tray 1. For details about loading envelopes, see "Loading
Envelopes", Paper Specifications and Adding Paper.
Loading Paper into the Bypass Tray
Use the bypass tray to use OHP transparencies, adhesive labels and paper that cannot be loaded in the
paper trays.
Loading Paper
123
To Next Page
Loading...
Need help?
General
