Message Cause Solution
"Printing was stopped due to
the power supply being low
voltage. Turn the main
power switch off then on."
Printing has stopped
because the power supply
voltage is low.
Turn off the power, and then turn it on
again.
"Self checking..." The machine is performing
image adjustment
operations.
The machine may perform periodic
maintenance during operations. The
frequency and duration of
maintenance depends on the humidity,
temperature, and printing factors such
as number of prints, paper size, and
paper type. Wait for the machine to
resume operation.
When There Is a Problem Scanning or Storing Originals
Message Cause Solution
"Captured file exceeded
max. number of pages per
file. Cannot send the
scanned data."
The maximum number of
pages per file has been
exceeded.
Reduce the number of pages in the
transmitted file, and then resend the
file. For details about the maximum
number of pages per file, see "Storage
Function", Scan.
"Original(s) is being
scanned for a different
function."
Another function of the
machine is being used.
Cancel the job in progress. Press [Exit],
and then press [Stop]. Follow the
instructions in the message that
appears and exit the function that is
running.
10. Troubleshooting
198
To Next Page
Loading...
Need help?
General
