Error Log
The Error Log on the configuration page has the error logs (SC codes) and the following information.
However, the following error codes cannot be stored after turning off the machine.
Error Code Description
Code 3
• Paper misfeed
• Paper is not detected in the tray.
•
The loaded paper size does not match the setting.
• Some unit(s) is not correctly installed.
Code 4 Print/Data Error
Code 5 A consumable supply has run out
Code 6
Warning; Toner near end, Waste toner bottle near full, TM sensor
cleaning, Fusing belt near end or Transfer belt near end
Code 7 Alert; Diagnostic Error
Counter and Coverage (only for Printer Models)
Configuration Page
The configuration page for the printer models has the paper jam, coverage and consumed AIO counters
in the bottom line, but these counter names are not printed on the configuration page. These counters
give the following information;
Three counters [A]: Feed jam counter, inner jam counter, duplex jam counter
Four counters [B]: Recent coverage of K, C, M, Y
Four counters [C]: Accumulated Coverage of K, C, M, Y
Four counters [D]: Consumed High Yield AIO counter of K, C, M, Y
Four counters [E]: Consumed Short Yield AIO counter of K, C, M, Y
Four counters [F]: High yield AIO Replacement counter of K, C, M, Y
Four counters [G]: Short yield AIO Replacement counter of K, C, M, Y
The symbols [H] printed beside the remaining toner counter indicate the type of the AIO.
5. System Maintenance Reference
150
To Next Page
Loading...
Need help?
General
