LSU Adjustment
Input 160 bytes
setting.
Character: alphanumeric "0-9", "a-f", "A-F", only valid
data can be input.
Input length: 160 bytes
Trans. Belt Adj
When you execute "Trans. Belt Adj", the transfer belt adjustment is done. This
calibrates the motor speed to match the length of the new transfer belt.
Fuser SC Detect On/Off*
If On, the engine detects SC559. If Off, the engine does
not detect "Fusing SC Reset".
Fuser SC Reset Resets the Fusing related SC.
Color Regist
The engine will do color registration and density tuning automatically.
The printer will warm up automatically after this setting is changed.
Special Mode
DFU (Designed for Factory Use)
Do not change this setting.
Economy Color
Tentative Den
Text: 100 / 50 / 30 (Default: 100)
Image: 100 / 50 / 30 (Default: 50)
Graphic:100 / 50 / 30 (Default: 30)
Conversion Mode
Sets the conversion mode for the economy color print.
No: No conversion is executed.
Color Up Mode: Converts into economy color. The image density is decreased.
B&W Up Mode: Converts into Economy Black and white.
Fax Service Test Menu (only for MF Models)
Entering the Fax Service Test Menu
Turn on the machine while pressing the "Facsimile" key.
Selecting an Item
To select the item, press the "Up" or "Down" key.
5. System Maintenance Reference
146
To Next Page
Loading...
Need help?
General
