1. While lightly pinching the side fence, align it with the paper size to be loaded.
2. Load paper face up and neatly stacked.
Do not stack paper over the limit mark.
• You cannot perfect bind a booklet if the thickness of the book block's spine exceeds 23 mm (0.9
inches).
• Depending on your machine, the procedure for selecting the orientation of covers and originals for
the printer function might be slightly different. For details, refer to the procedure for your machine.
• When loading thick paper of 251.0 g/m
2
(138.8 lb. Index) or heavier in the interposer trays of
the perfect binder, make sure the grain of the paper is perpendicular to the feed direction.
• If you are loading sheets that are likely to stick together (such as sheets of coated paper), be sure
to fan them thoroughly before loading. Fanning them will help prevent jams and allow them to be
fed in one sheet at a time.
• The perfect binding process may scratch glossy paper.
Loading Orientation-fixed Paper or Two-sided Paper
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or
copied paper) might not be printed correctly, depending on how the originals and paper are placed.
8. Adding Paper and Toner
118
To Next Page
Loading...
Need help?
General
