4. Specify the envelope size, and then press [OK].
5. Press [Special Paper].
6. Select [Envelope], and then press [OK].
7. Place the originals, and then press the [Start] key.
Copying onto Envelopes from the Wide Large Capacity Tray
Before using this function, specify the paper size and type under [Tray Paper Settings]. For the paper
type, select [Envelope]. For details, see "Changing Tray Paper Settings", Paper Settings .
1. Select the paper tray where the envelopes are loaded.
2. Place the originals, and then press the [Start] key.
3. Copy
66
To Next Page
Loading...
Need help?
General
