Messages Causes Solutions
"Updating the destination list...
Please wait. Specified
destination(s) or sender's name
has been cleared."
The destination list is being
updated from the network using
Web Image Monitor.
Wait until the message
disappears. Do not turn off the
power while this message is
displayed. Depending on the
number of destinations to be
updated, there may be some
delay before you can resume
operation. Operation is not
possible while this message is
displayed.
"Updating the destination list...
Please wait. Specified
destination(s) or sender's name
has been cleared."
A specified destination or
sender's name was cleared
when the destination list in the
delivery server was updated.
Specify the destination or
sender's name again.
When Data Cannot Be Sent Due to a Problem with the Destination
Messages Causes Solutions
"Some invalid destination(s)
contained. Do you want to
select only valid destination(s)?"
The specified group contains e-
mail destinations and/or folder
destinations, either of which are
incompatible with the specified
transmission method.
In the message that appears at
each transmission, press
[Select].
"SMTP authentication E-mail
address and Administrator E-
mail address mismatch."
The SMTP authentication e-mail
address and the administrator's
e-mail address do not match.
For details about how to set
SMTP authentication, see "File
Transfer", Connecting the
Machine/ System Settings .
9. Troubleshooting
220
To Next Page
Loading...
Need help?
General
