Problems Causes Solutions
The position of the fold is
incorrect when Letter Fold-in is
applied to a B5 JIS sheet.
Multi-sheet Fold has been
specified when only one sheet is
being printed.
In [Output/Customize
Function/Finisher] on the initial
copier screen, under [Folding
Unit], select [Letter Fold-in].
Press [Change], and then set
"Multi-sheet Fold" to [Off]. For
details about how to specify the
Multi-sheet Fold function, see
"Fold", Copy/ Document Server
.
When using the printer function,
change the printer driver Letter
Fold-in settings so that Multi-
sheet Fold is not specified.
• If you cannot make copies as you want because of the paper type, paper size, or paper capacity
problems, use the recommended paper. For details about recommended paper, see page 122
"Recommended Paper".
When Multiple Functions Cannot Be Executed Simultaneously
If you are not able to carry out your job, it may be that the machine is being used by another function.
Wait until the current job is completed before trying again. In certain cases, you can carry out another
job using a different function while the current job is being performed.
For details about the compatibility of the functions below, see "Function Compatibility", Troubleshooting
.
• Copier
• Printer
• Scanner
• TWAIN
• Document Server
• Desktop Binder
• Web Document Server
On Type 4 and 5 machines, you can use the printer function only.
9. Troubleshooting
174
To Next Page
Loading...
Need help?
General
