Messages Causes Solutions
"Perfect Binding is not
available with the settings."
Perfect Binding is not
possible under the settings
that you have specified.
Check the current settings. For details
about which functions are not
available when Perfect Binding is
specified, see "Perfect Binding", Copy/
Document Server .
"Perfect Binding is not
available with this finishing
size."
Perfect Binding cannot be
used with the finishing size
that you have specified.
Select a proper finishing size. For
details about proper finishing sizes, see
"Specifications for Perfect Binder",
Maintenance and Specifications .
"Perfect Binding is not
available with this No. of
sheets."
Perfect Binding is not
possible with the number of
sheets that you have
specified.
• Check the number of sheets.
• Specify the proper number of
sheets.
For details about the proper number of
sheets, see "Specifications for Perfect
Binder", Maintenance and
Specifications .
"Contains incorrect setting(s)
for Perfect Binding."
Perfect Binding cannot be
used with the paper size that
you have specified.
Select a proper paper size. For details
about proper paper sizes, see
"Specifications for Perfect Binder",
Maintenance and Specifications .
"Press [Continue] to scan
and copy remaining
originals."
The machine checked if the
remaining originals should
be copied after the scanned
originals were printed.
Remove all copies, and then press
[Continue] to continue copying. Press
[Stop] to stop copying.
"Ring Binding is not
available for different paper
sizes."
Mixed Sizes mode is
specified.
Cancel Mixed Sizes mode, or specify
the Auto Reduce / Enlarge function.
"Ring Binding is not
available with the selected
position."
Ring Binding cannot be
applied in the position that
you have specified.
Select a proper binding position. For
details about proper binding positions,
see "Ring Binding", Copy/ Document
Server .
9. Troubleshooting
178
To Next Page
Loading...
Need help?
General
