No Repeat Steps 1 and 2.
3. Is the toner fusibility within the permissible range?
Yes Finished!
No Contact your service representative.
• After performing the solution, it is recommended to perform the color calibration of the external
controller.
• Check the toner fusibility as follows:
• The printed image does not come off.
• The toner does not come off even if it is lightly rubbed by a nail.
• The toner does not come off even if it is rubbed by the cloth for cleaning the contact glass.
Waves: Trailing Edge (A4 and larger)
Waves appear on the trailing edge of the paper perpendicular to the feed direction.
Cause:
If fusing is performed too quickly for paper delivery, the resulting slack at the trailing edge of the paper
may produce ripples in the sheet.
This may occur when printing on A4 or larger paper.
Solution:
1. In the [Machine: Maintenance] group on the [Adjustment Settings for Operators] menu,
execute 0512: [Fuser Unit Speed Adjustment].
Others
203
To Next Page
Loading...
Need help?
General
