Chapter 2
16
Acceptable paper and
other print media 2
Print quality may vary according to the type of
paper you are using.
You can use the following types of print
media: plain paper, bond paper, recycled
paper, transparencies, labels or envelopes.
For best results, follow the instructions below:
Use paper made for plain paper copying.
Use paper that is 75 to 90 g/m
2
.
Use labels and transparencies which are
designed for use in laser machines.
Do not put different types of paper in the
paper tray at the same time because it
may cause paper jams or misfeeds.
For correct printing, you must choose the
same paper size from your software
application as the paper in the tray.
Avoid touching the printed surface of the
paper immediately after printing.
When you use transparencies remove
each sheet immediately to prevent
smudging or paper jams.
Use long grain paper with a neutral Ph
value, and a moisture content of approx
5%.
Recommended paper and
print media (for EU) 2
To get the best print quality, we suggest using
the following paper.
Recommended paper and
print media (For USA and
Canada) 2
To get the best print quality, we suggest using
the following paper.
Paper Type Item
Plain Paper
Xerox Premier 80 g/m
2
Xerox Business 80 g/m
2
Recycled Paper Xerox Recycled Supreme
80g/m
2
Transparency 3M CG3300
Labels Avery laser label L7163
Envelope Antalis River series (DL)
Paper Type Item
Plain paper Xerox 4200DP 20 lb
Hammermill Laser Print
(24 lb=90 g/m
2
)
Recycled Paper No specific brand
recommended
Transparency 3M CG3300
Labels Avery laser labels white
#5160
Envelope No specific brand
recommended
To Next Page
Loading...
Need help?
General
