Installing the Printer Driver Using USB
19
1
J Click [Finish].
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the “USB001” port is added to the [Printers]
window.
Note
❒ To disable Auto Run, press the {Shift} key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
❒ The number after “USB” varies depending on the number of printers con-
nected.
❒ The USB port is available only for the printer driver that is installed first.
To install additional drivers for this printer, install them using other ports
(such as LPT1). Then, after the installation, change the port settings to the
specified USB port.
Installing the PostScript 3 Printer Driver (Windows XP and
Windows Server 2003/2003 R2)
Important
❒ To install this printer driver, you must have an account that has Manage
Printers permission. Log on as an Administrators group member.
If the printer driver has already been installed, plug and play is enabled, and the
icon of the printer connected to the “USB” port is added to the [Printers] window.
If the printer driver is not installed, follow the plug-and-play instructions of the
printer to install it from the CD-ROM provided.
A Insert the CD-ROM into the CD-ROM drive.
When Auto Run starts, click [Exit].
B Check the printer's power switch is turned to off.
C Connect the printer and computer using the USB cable.
Connect the USB cable firmly.
D Turn the printer's power switch back to on.
The Plug and Play is enabled and the [Found New Hardware Wizard] dialog box
appears, and USB Printing Support is installed automatically.
E Select [No, not this time], and then click [Next >].
F In the [Found New Hardware Wizard] dialog box, click [Install from a list or specific
location (Advanced)], and then click [Next >].
G Select the [Include this location in the search:] check box, and then click
[Browse].
To Next Page
Loading...
Need help?
General