Using Web Image Monitor
45
4
Configuring the Network Settings
Click [Network Settings] to display the page for configuring the network settings.
This page contains six tabs: [Network Status], [Network Application], [DNS], [Alert Mes-
sages], [SNMP], and [SMTP].
Checking the Network Status
Click the [Network Status] tab on the network settings page to display the network
information.
❖ General Status
❖ TCP/IP Status
Item Description
Link Status Shows the type and speed of the network
connection.
IPP Printer Name Shows the name used to identify the printer on
the network.
Network Version Shows the version of the printer's network
module (a part of the printer firmware).
MAC Address Shows the MAC address of the printer.
Item Description
DHCP Select whether the printer should receive a
dynamic IP address automatically using
DHCP. To use DHCP, select [Enable].
When enabled, the items below cannot be
configured.
IP Address Enter the IP address for the printer.
Subnet Mask Enter the subnet mask of the network.
Gateway Enter the IP address of the network gateway.
To Next Page
Loading...
Need help?
General