RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
1-2
General Inspection
When you get a new DG2000 Series Function/ Arbitrary Waveform Generator, you are
suggested to take the following steps to inspect the instrument.
1. Inspect the shipping container for damage.
If there are damages in the packing or foam, keep them until the whole machine
and the accessories passing the electric and mechanical testing.
2. Check the accessories.
Accessories supplied with the instrument are listed in chapter 6 "Appendix A:
DG2000 Series Accessories".
If the contents are incomplete or damaged, please contract the local selling
representative of RIGOL.
3. Inspect the instrument.
In case any mechanical damage or defect, or if the instrument does not operate
properly or pass performance tests, notify your RIGOL Sales Representative.
If the shipping container is damaged, or the cushioning materials show signs of
stress, notify the carrier of your RIGOL sales office. Keep the shipping materials
for the carrier’s inspection. RIGOL offices will arrange for repair or replacement
at RIGOL’s option without waiting for claim settlement.
To Next Page
Loading...
Need help?
General
